dc in red (+) 12? #22awg blue (-) 12? #22awg led 7 led 13 led 1 led 8 led 14 led 19 led 3 led 2 led 9 led 15 led 21 led 20 led 4 led 5 led 10 led 16 led 22 led 6 led 11 led 17 led 12 led 18 led 24 led 23 1.00 [25.4] 2.83 [71.88] 0.50 [12.7] 0.15 [3.81] r 0.07 [1.78] 0.23 [5.84] 0 .50 [12.7] 3.00 [76.2] ? 3.00 [76.2] drawing n0900-0163-r02 tc in [mm] height: 0.062 [1.58] fr-4 pcb 0.020 [0.5] leds 0.082 [2.08] total 120 ? 2.7 [68.58] b.c. for cutouts led light engine, 3.0 round module constant-current dc array, 6 led series x 4 parallel strings engineered by norlux 24 nichia leds 5 yr. warranty 3.0 inch round dc led module @ 350ma model number total board power (w) total current (ma) color temp (k) lumens ( 15%) board lpw 98013 6.3 350 2700 769 123 98014 6.3 350 3000 820 131 98015 6.3 350 3500 860 137 98016 6.3 350 4000 883 141 98031 6.3 350 5000 910 144 dimensions: specifcations driver type: constant-current drive current: 350ma nominal nom. forward voltage: 17.9v total board power: 6.3w nominal life: 50,000 hrs, 70% lumen maint. @ ta max 40oc, used as specifed max junction temp: 90c max test point temp: 80c operating temp: -40oc to +60oc ambient storage temp: -40oc to +80oc viewing angle (fwhm): 120 lambertian distribution cri: 83 typical ?made in usa? of imported and domestic components ? designed for easy use in standard luminaires ? tight led pitch eliminates pixelization, no complex lens or optics required ? color: ? ansi binning, 3 step macadam ellipse ? suggested applications: commercial or residential downlights ? customizable: engines can be modifed to your application. contact us. rev 5-14-15 for poke-in connectors, use #24-18 awg stranded or solid wire connectivity options suffx connection (blank) 12 in, #22 awg stranded leads -01 no leads -02 push-in connectors thomas research products ? 1215 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com specifcations subject to change without notice. trademarks are property of their respective owners.
pg 2 of 2 cie chromaticity coordinates: tc (c) 65ma/led relative luminous flux / tc temperature 0 20 40 60 80 100 120 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 compatible trp drivers: the drivers listed here are all compatible with this module. choose the best driver for your application. ? bled12w-036-c0350 ? led12w-24-c0350 maximum run lengths the max number of boards wired in a chain (series) is limited by the max current rating of the frst board wired to the driver. the sum of the board currents, in the chain, funnels through the frst board. multiple chains can connect directly to the power supply in parallel. see table for max chain length. product series/parallel max allowable boards high current (nom) low current 3 round series 10 n/a mounting notes the led assembly is supplied with mounting holes, per the dimensional drawing. it is important to mount the board in such a way as to maintain the tc point below the max. the steady state thermals in application will dictate if the board needs to be mounted directly to metallic housing and/or include a thermal pad. for example fully enclosed recessed fxture will require better thermal mounting than an open air pendant. thermal application notes this board requires additional heat sinking to run above 45oc ambient at nominal specifcations. heat sink is also required when operated above specifed drive currents. maximum current max current: 720ma voltage at max current: 20v, power at max current: 14.4w the total maximum current refects the led maximum forward current only, without considering thermal needs. driving the leds this hard will likely violate their thermal limits, depending on the application. tc point must remain at or below the max temperature, or the warranty will be voided. temperature is directly correlated to led current. static sensitive device handle only at static-safe work stations. packaging 50 per box standard. 3 round std. dc led light engine module step dimming: this light engine can be step-dimmed, with a recommended trp dimmable driver and sd series step-dimming module. see the sd2 or sd3 data sheet for wiring information. constant current driver constant current driver parallel series series/parallel confgurations parallel: the positive and negative of one board is connected to the respective positive and negative of the next. current adds, so the supply must be 2x the current for 2 boards. series: the negative of one board is connected to the positive of the next. voltage adds, so the supply must be 2x the voltage for 2 boards. x y 0.3783 0.3836 0.3909 0.3906 0.3746 0.3687 0.3864 0.3757 4000k 3 step macadams ellipse x y 0.4045 0.3975 0.4189 0.4044 0.3989 0.3819 0.412 0.3875 3500k 3 step macadams ellipse x y 0.4325 0.4101 0.4452 0.4146 0.4244 0.3923 0.4362 0.3965 3000k 3 step macadams ellipse x y 0.4576 0.4183 0.4698 0.4212 0.4478 0.3999 0.4591 0.4025 2700k 3 step macadams ellipse x y 0.3408 0.3461 0.3485 0.3520 0.3416 0.3585 0.3499 0.3644 5000k 3 step macadams ellipse thomas research products ? 1215 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
|
